hexdump(1) — Linux manual page
HEXDUMP(1) User Commands HEXDUMP(1)
NAME
hexdump - display file contents in hexadecimal, decimal, octal,
or ascii
SYNOPSIS
hexdump options file ...
hd options file ...
DESCRIPTION
The hexdump utility is a filter which displays the specified
files, or standard input if no files are specified, in a
user-specified format.
OPTIONS
Below, the length and offset arguments may be followed by the
multiplicative suffixes KiB (=1024), MiB (=1024*1024), and so on
for GiB, TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g.,
"K" has the same meaning as "KiB"), or the suffixes KB (=1000),
MB (=1000*1000), and so on for GB, TB, PB, EB, ZB and YB.
-b, --one-byte-octal
One-byte octal display. Display the input offset in
hexadecimal, followed by sixteen space-separated,
three-column, zero-filled bytes of input data, in octal, per
line.
-X, --one-byte-hex
One-byte hexadecimal display. Display the input offset in
hexadecimal, followed by sixteen space-separated, two-column,
zero-filled bytes of input data, in hexadecimal, per line.
-c, --one-byte-char
One-byte character display. Display the input offset in
hexadecimal, followed by sixteen space-separated,
three-column, space-filled characters of input data per line.
-C, --canonical
Canonical hex+ASCII display. Display the input offset in
hexadecimal, followed by sixteen space-separated, two-column,
hexadecimal bytes, followed by the same sixteen bytes in %_p
format enclosed in | characters. Invoking the program as hd
implies this option.
-d, --two-bytes-decimal
Two-byte decimal display. Display the input offset in
hexadecimal, followed by eight space-separated, five-column,
zero-filled, two-byte units of input data, in unsigned
decimal, per line.
-e, --format format_string
Specify a format string to be used for displaying data.
-f, --format-file file
Specify a file that contains one or more newline-separated
format strings. Empty lines and lines whose first non-blank
character is a hash mark (#) are ignored.
-L, --color[=when]
Accept color units for the output. The optional argument when
can be auto, never or always. If the when argument is
omitted, it defaults to auto. The colors can be disabled; for
the current built-in default see the --help output. See also
the Colors subsection and the COLORS section below.
-n, --length length
Interpret only length bytes of input.
-o, --two-bytes-octal
Two-byte octal display. Display the input offset in
hexadecimal, followed by eight space-separated, six-column,
zero-filled, two-byte quantities of input data, in octal, per
line.
-s, --skip offset
Skip offset bytes from the beginning of the input.
-v, --no-squeezing
The -v option causes hexdump to display all input data.
Without the -v option, any number of groups of output lines
which would be identical to the immediately preceding group
of output lines (except for the input offsets), are replaced
with a line comprised of a single asterisk.
-x, --two-bytes-hex
Two-byte hexadecimal display. Display the input offset in
hexadecimal, followed by eight space-separated, four-column,
zero-filled, two-byte quantities of input data, in
hexadecimal, per line.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
For each input file, hexdump sequentially copies the input to
standard output, transforming the data according to the format
strings specified by the -e and -f options, in the order that
they were specified.
FORMATS
A format string contains any number of format units, separated by
whitespace. A format unit contains up to three items: an
iteration count, a byte count, and a format.
The iteration count is an optional positive integer, which
defaults to one. Each format is applied iteration count times.
The byte count is an optional positive integer. If specified it
defines the number of bytes to be interpreted by each iteration
of the format.
If an iteration count and/or a byte count is specified, a single
slash must be placed after the iteration count and/or before the
byte count to disambiguate them. Any whitespace before or after
the slash is ignored.
The format is required and must be surrounded by double quote ("
") marks. It is interpreted as a fprintf-style format string (see
fprintf(3)), with the following exceptions:
1.
An asterisk (*) may not be used as a field width or
precision.
2.
A byte count or field precision is required for each s
conversion character (unlike the fprintf(3) default which
prints the entire string if the precision is unspecified).
3.
The conversion characters h, l, n, p, and q are not
supported.
4.
The single character escape sequences described in the C
standard are supported:
┌───────────────────┬────┐
│ │ │
│ NULL │ \0 │
├───────────────────┼────┤
│ │ │
│ <alert character> │ \a │
├───────────────────┼────┤
│ │ │
│ <backspace> │ \b │
├───────────────────┼────┤
│ │ │
│ <form-feed> │ \f │
├───────────────────┼────┤
│ │ │
│ <newline> │ \n │
├───────────────────┼────┤
│ │ │
│ <carriage return> │ \r │
├───────────────────┼────┤
│ │ │
│ <tab> │ \t │
├───────────────────┼────┤
│ │ │
│ <vertical tab> │ \v │
└───────────────────┴────┘
Conversion strings
The hexdump utility also supports the following
additional conversion strings.
_a[dox]
Display the input offset, cumulative across input
files, of the next byte to be displayed. The appended
characters d, o, and x specify the display base as
decimal, octal or hexadecimal respectively.
_A[dox]
Almost identical to the _a conversion string except
that it is only performed once, when all of the input
data has been processed.
_c
Output characters in the default character set.
Non-printing characters are displayed in
three-character, zero-padded octal, except for those
representable by standard escape notation (see
above), which are displayed as two-character strings.
_p
Output characters in the default character set.
Non-printing characters are displayed as a single
'.'.
_u
Output US ASCII characters, with the exception that
control characters are displayed using the following,
lower-case, names. Characters greater than 0xff,
hexadecimal, are displayed as hexadecimal strings.
┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐
│ │ │ │ │ │ │
│ 000 nul │ 001 soh │ 002 stx │ 003 etx │ 004 eot │ 005 enq │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 006 ack │ 007 bel │ 008 bs │ 009 ht │ 00A lf │ 00B vt │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 00C ff │ 00D cr │ 00E so │ 00F si │ 010 dle │ 011 dc1 │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 012 dc2 │ 013 dc3 │ 014 dc4 │ 015 nak │ 016 syn │ 017 etb │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 018 can │ 019 em │ 01A sub │ 01B esc │ 01C fs │ 01D gs │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 01E rs │ 01F us │ 0FF del │ │ │ │
└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
Colors
When put at the end of a format specifier,
hexdump highlights the respective string with the
color specified. Conditions, if present, are
evaluated prior to highlighting.
_L[color_unit_1,color_unit_2,...,color_unit_n]
The full syntax of a color unit is as follows:
[!]COLOR[:VALUE][@OFFSET_START[-END]]
!
Negate the condition. Please note that it
only makes sense to negate a unit if both a
value/string and an offset are specified. In
that case the respective output string will
be highlighted if and only if the
value/string does not match the one at the
offset.
COLOR
One of the 8 basic shell colors.
VALUE
A value to be matched specified in
hexadecimal, or octal base, or as a string.
Please note that the usual C escape sequences
are not interpreted by hexdump inside the
color_units.
OFFSET
An offset or an offset range at which to
check for a match. Please note that lone
OFFSET_START uses the same value as END
offset.
Counters
The default and supported byte counts for the
conversion characters are as follows:
%_c, %_p, %_u, %c
One byte counts only.
%d, %i, %o, %u, %X, %x
Four byte default, one, two and four byte
counts supported.
%E, %e, %f, %G, %g
Eight byte default, four byte counts
supported.
The amount of data interpreted by each format
string is the sum of the data required by each
format unit, which is the iteration count times
the byte count, or the iteration count times the
number of bytes required by the format if the
byte count is not specified.
The input is manipulated in blocks, where a block
is defined as the largest amount of data
specified by any format string. Format strings
interpreting less than an input block’s worth of
data, whose last format unit both interprets some
number of bytes and does not have a specified
iteration count, have the iteration count
incremented until the entire input block has been
processed or there is not enough data remaining
in the block to satisfy the format string.
If, either as a result of user specification or
hexdump modifying the iteration count as
described above, an iteration count is greater
than one, no trailing whitespace characters are
output during the last iteration.
It is an error to specify a byte count as well as
multiple conversion characters or strings unless
all but one of the conversion characters or
strings is _a or _A.
If, as a result of the specification of the -n
option or end-of-file being reached, input data
only partially satisfies a format string, the
input block is zero-padded sufficiently to
display all available data (i.e., any format
units overlapping the end of data will display
some number of the zero bytes).
Further output by such format strings is replaced
by an equivalent number of spaces. An equivalent
number of spaces is defined as the number of
spaces output by an s conversion character with
the same field width and precision as the
original conversion character or conversion
string but with any '+', ' ', '#' conversion flag
characters removed, and referencing a NULL
string.
If no format strings are specified, the default
display is very similar to the -x output format
(the -x option causes more space to be used
between format units than in the default output).
EXIT STATUS
hexdump exits 0 on success and > 0 if an error
occurred.
CONFORMING TO
The hexdump utility is expected to be IEEE Std
1003.2 ("POSIX.2") compatible.
EXAMPLES
Display the input in perusal format:
"%06.6_ao " 12/1 "%3_u "
"\t" "%_p "
"\n"
Implement the -x option:
"%07.7_Ax\n"
"%07.7_ax " 8/2 "%04x " "\n"
MBR Boot Signature example: Highlight the
addresses cyan and the bytes at offsets 510 and
511 green if their value is 0xAA55, red
otherwise.
"%07.7_Ax_L[cyan]\n"
"%07.7_ax_L[cyan] " 8/2 " %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\n"
COLORS
The output colorization is implemented by
terminal-colors.d(5) functionality. Implicit
coloring can be disabled by an empty file
/etc/terminal-colors.d/hexdump.disable
for the hexdump command or for all tools by
/etc/terminal-colors.d/disable
The user-specific
$XDG_CONFIG_HOME/terminal-colors.d or
$HOME/.config/terminal-colors.d overrides the
global setting.
Note that the output colorization may be enabled
by default, and in this case terminal-colors.d
directories do not have to exist yet.
REPORTING BUGS
For bug reports, use the issue tracker at
https://github.com/util-linux/util-linux/issues.
AVAILABILITY
The hexdump command is part of the util-linux
package which can be downloaded from Linux Kernel
Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
This page is part of the util-linux (a random
collection of Linux utilities) project.
Information about the project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩.
If you have a bug report for this manual page,
send it to util-linux@vger.kernel.org. This page
was obtained from the project's upstream Git
repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩
on 2024-06-14. (At that time, the date of the
most recent commit that was found in the
repository was 2024-06-10.) If you discover any
rendering problems in this HTML version of the
page, or you believe there is a better or more
up-to-date source for the page, or you have
corrections or improvements to the information in
this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org