groff_font(5) — Linux manual page
groff_font(5) File Formats Manual groff_font(5)
Name
groff_font - GNU roff device and font description files
Description
The groff font and output device description formats are slight
extensions of those used by AT&T device-independent troff. In
distinction to the AT&T implementation, groff lacks a binary
format; all files are text files. (Plan 9 troff has also
abandoned the binary format.) The device and font description
files for a device name are stored in a devname directory. The
device description file is called DESC, and, for each font
supported by the device, a font description file is called f,
where f is usually an abbreviation of a font's name and/or style.
For example, the ps (PostScript) device has groff font
description files for Times roman (TR) and Zapf Chancery Medium
italic (ZCMI), among many others, while the utf8 device (for
terminals) has only font descriptions for the roman, italic,
bold, and bold-italic styles (R, I, B, and BI, respectively).
Device and font description files are read by the formatter,
troff, and by output drivers. The programs typically delegate
these files' processing to an internal library, libgroff,
ensuring their consistent interpretation.
DESC
file format
The DESC file contains a series of directives; each begins a
line. Their order is not important, with two exceptions: (1) the
res directive must precede any papersize directive; and (2) the
charset directive must come last (if at all). If a directive
name is repeated, later entries in the file override previous
ones (except that the paper dimensions are computed based on the
res directive last seen when papersize is encountered). Spaces
and/or tabs separate words and are ignored at line boundaries.
Comments start with the “#” character and extend to the end of a
line. Empty lines are ignored.
family fam
The default font family is fam.
fonts n F1 ... Fn
Fonts F1, ..., Fn are mounted at font positions m+1, ...,
m+n where m is the number of styles (see below). This
directive may extend over more than one line. A font name
of 0 causes no font to be mounted at the corresponding
position.
hor n The horizontal motion quantum is n basic units.
Horizontal quantities are rounded to multiples of n.
image_generator program
Use program to generate PNG images from PostScript input.
Under GNU/Linux, this is usually gs(1), but under other
systems (notably Cygwin) it might be set to another name.
The grohtml(1) driver uses this directive.
paperlength n
The vertical dimension of the output medium is n basic
units (deprecated: use papersize instead).
papersize format-or-dimension-pair-or-file-name ...
The dimensions of the output medium are as according to
the argument, which is either a standard paper format, a
pair of dimensions, or the name of a plain text file
containing either of the foregoing. Recognized paper
formats are the ISO and DIN formats A0–A7, B0–B7, C0–C7,
and D0–D7; the U.S. formats letter, legal, tabloid,
ledger, statement, and executive; and the envelope formats
com10, monarch, and DL. Matching is performed without
regard for lettercase.
Alternatively, the argument can be a custom paper format
length,width (with no spaces before or after the comma).
Both length and width must have a unit appended; valid
units are “i” for inches, “c” for centimeters, “p” for
points, and “P” for picas. Example: “12c,235p”. An
argument that starts with a digit is always treated as a
custom paper format.
Finally, the argument can be a file name (e.g.,
/etc/papersize); if the file can be opened, the first line
is read and a match attempted against each other form. No
comment syntax is supported.
More than one argument can be specified; each is scanned
in turn and the first valid paper specification used.
paperwidth n
The horizontal dimension of the output medium is n basic
units (deprecated: use papersize instead).
pass_filenames
Direct troff to emit the name of the source file being
processed. This is achieved with the intermediate output
command “x F”, which grohtml interprets.
postpro program
Use program as the postprocessor.
prepro program
Use program as a preprocessor. The html and xhtml output
devices use this directive.
print program
Use program as the print spooler. If omitted, groff's -l
and -L options are ignored.
res n The device resolution is n basic units per inch.
sizes s1 ... sn 0
The device has fonts at s1, ..., sn scaled points (see
below). The list of sizes must be terminated by a 0.
Each si can also be a range of sizes m–n. The list can
extend over more than one line.
sizescale n
A typographical point is subdivided into n scaled points.
The default is 1.
styles S1 ... Sm
The first m font mounting positions are associated with
styles S1, ..., Sm.
tcommand
The postprocessor can handle the t and u intermediate
output commands.
unicode
The output device supports the complete Unicode
repertoire. This directive is useful only for devices
which produce character entities instead of glyphs.
If unicode is present, no charset section is required in
the font description files since the Unicode handling
built into groff is used. However, if there are entries
in a font description file's charset section, they either
override the default mappings for those particular
characters or add new mappings (normally for composite
characters).
The utf8, html, and xhtml output devices use this
directive.
unitwidth n
Quantities in the font description files are in basic
units for fonts whose type size is n scaled points.
unscaled_charwidths
Make the font handling module always return unscaled glyph
widths. The grohtml driver uses this directive.
use_charnames_in_special
troff should encode named glyphs inside device control
commands. The grohtml driver uses this directive.
vert n The vertical motion quantum is n basic units. Vertical
quantities are rounded to multiples of n.
charset
This directive and the rest of the file are ignored. It
is recognized for compatibility with other troff
implementations. In GNU troff, character set repertoire
is described on a per-font basis.
troff recognizes but ignores the directives spare1, spare2, and
biggestfont.
The res, unitwidth, fonts, and sizes lines are mandatory.
Directives not listed above are ignored by troff but may be used
by postprocessors to obtain further information about the device.
Font description file format
On typesetting output devices, each font is typically available
at multiple sizes. While paper measurements in the device
description file are in absolute units, measurements applicable
to fonts must be proportional to the type size. groff achieves
this using the precedent set by AT&T device-independent troff:
one font size is chosen as a norm, and all others are scaled
linearly relative to that basis. The “unit width” is the number
of basic units per point when the font is rendered at this
nominal size.
For instance, groff's lbp device uses a unitwidth of 800. Its
Times roman font (“TR”) has a spacewidth of 833; this is also the
width of its comma, period, centered period, and mathematical
asterisk, while its “M” is 2,963 basic units. Thus, an “M” on
the lbp device is 2,963 basic units wide at a notional type size
of 800 points. (800-point type is not practical for most
purposes, but using it enables the quantities in the font
description files to be expressed as integers.)
A font description file has two sections. The first is a
sequence of directives, and is parsed similarly to the DESC file
described above. Except for the directive names that begin the
second section, their ordering is immaterial. Later directives
of the same name override earlier ones, spaces and tabs are
handled in the same way, and the same comment syntax is
supported. Empty lines are ignored throughout.
name F The name of the font is F. “DESC” is an invalid font
name. Simple integers are valid, but their use is
discouraged. (groff requests and escape sequences
interpret non-negative integers as mounting positions
instead. Further, a font named “0” cannot be
automatically mounted by the fonts directive of a DESC
file.)
spacewidth n
The width of an unadjusted inter-word space is n basic
units.
The directives above must appear in the first section; those
below are optional.
slant n
The font's glyphs have a slant of n degrees; a positive n
slants in the direction of text flow.
ligatures lig1 ... lign [0]
Glyphs lig1, ..., lign are ligatures; possible ligatures
are ff, fi, fl, ffi, and ffl. For compatibility with
other troff implementations, the list of ligatures may be
terminated with a 0. The list of ligatures must not
extend over more than one line.
special
The font is special: when a glyph is requested that is not
present in the formatter's currently selected font, the
glyph is sought in any mounted fonts that bear this
property.
Other directives in this section are ignored by troff, but may be
used by postprocessors to obtain further information about the
font.
The second section contains one or two subsections. These can
appear in either order; the first one encountered commences the
second section. Each starts with a directive on a line by
itself. A charset subsection is mandatory unless the associated
DESC file contains the unicode directive. Another subsection,
kernpairs, is optional.
The directive charset starts the character set subsection. (On
typesetters, this directive is misnamed since it starts a list of
glyphs, not characters.) It precedes a series of glyph
descriptions, one per line. Each such glyph description
comprises a set of fields separated by spaces or tabs and
organized as follows.
name metrics type code [entity-name] [-- comment]
name identifies the glyph: a printable character c corresponds to
the troff ordinary character c, and a multi-character sequence
not beginning with \, corresponds to the GNU troff special
character escape sequence “\[name]”. A name consisting of three
minus signs, “---”, indicates that the glyph is unnamed: such
glyphs can be accessed only by the \N escape sequence in troff.
A special character named “---” can still be defined using .char
and similar requests. The name “\-” defines the minus sign
glyph. Finally, name can be the horizontal motion escape
sequences, \| and \^ (“thin” and “hair” spaces, respectively), in
which case only the width metric described below is applied; a
font can thus customize the widths of these spaces.
The form of the metrics field is as follows (on one line; it may
be broken here for readability).
width[,[height[,[depth[,[italic-correction[,[
left-italic-correction[,[subscript-correction]]]]]]]]]]
There must not be any spaces, tabs, or newlines between these
subfields, which are in basic units expressed as decimal
integers. Unspecified subfields default to 0. Since there is no
associated binary format, these values are not required to fit
into the C language data type char as they are in AT&T device-
independent troff.
The width subfield gives the width of the glyph. The height
subfield gives the height of the glyph (upwards is positive); if
a glyph does not extend above the baseline, it should be given a
zero height, rather than a negative height. The depth subfield
gives the depth of the glyph, that is, the distance below the
baseline to which the glyph extends (downwards is positive); if a
glyph does not extend below the baseline, it should be given a
zero depth, rather than a negative depth. Italic corrections are
relevant to glyphs in italic or oblique styles. The italic-
correction is the amount of space that should be added after an
oblique glyph to be followed immediately by an upright glyph.
The left-italic-correction is the amount of space that should be
added before an oblique glyph to be preceded immediately by an
upright glyph. The subscript-correction is the amount of space
that should be added after an oblique glyph to be followed by a
subscript; it should be less than the italic correction.
For fonts used with typesetters, the type field gives a featural
description of the glyph: it is a bit mask recording whether the
glyph is an ascender, descender, both, or neither. When a \w
escape sequence is interpolated, these values are bitwise or-ed
together for each glyph and stored in the ct register. In font
descriptions for terminals, all glyphs might have a type of zero,
regardless of their appearance.
0 means the glyph lies entirely between the baseline and a
horizontal line at the “x-height” of the font, as with
“a”, “c”, and “x”;
1 means the glyph descends below the baseline, like “p”;
2 means the glyph ascends above the font's x-height, like
“A” or “b”); and
3 means the glyph is both an ascender and a descender—this
is true of parentheses in some fonts.
The code field gives a numeric identifier that the postprocessor
uses to render the glyph. The glyph can be specified to troff
using this code by means of the \N escape sequence. The code can
be any integer (that is, any integer parsable by the C standard
library's strtol(3) function).
The entity-name field defines an identifier for the glyph that
the postprocessor uses to print the troff glyph name. This field
is optional; it was introduced so that the grohtml output driver
could encode its character set. For example, the glyph \[Po] is
represented by “£” in HTML 4.0. For efficiency, these data
are now compiled directly into grohtml. grops uses the field to
build sub-encoding arrays for PostScript fonts containing more
than 256 glyphs.
Anything on the line after the entity-name field or “--” is
ignored. When afmtodit generates font description files for
gropdf(1) and grops(1), it writes the UTF-16 code for the
character to the comment field.
A line in the charset section can also have the form
name "
identifying name as another name for the glyph mentioned in the
preceding line. Such aliases can be chained.
The directive kernpairs starts a list of kerning adjustments to
be made to adjacent glyph pairs from this font. It contains a
sequence of lines formatted as follows.
g1 g2 n
The foregoing means that when glyph g1 is typeset immediately
before g2, the space between them should be increased by n. Most
kerning pairs should have a negative value for n.
Files
/usr/local/share/groff/1.23.0/font/devname/DESC
describes the output device name.
/usr/local/share/groff/1.23.0/font/devname/F
describes the font known as F on device name.
See also
Groff: The GNU Implementation of troff, by Trent A. Fisher and
Werner Lemberg, is the primary groff manual. You can browse it
interactively with “info groff”.
“Troff User's Manual” by Joseph F. Ossanna, 1976 (revised by
Brian W. Kernighan, 1992), AT&T Bell Laboratories Computing
Science Technical Report No. 54, widely called simply “CSTR #54”,
documents the language, device and font description file formats,
and device-independent output format referred to collectively in
groff documentation as “AT&T troff”.
“A Typesetter-independent TROFF” by Brian W. Kernighan, 1982,
AT&T Bell Laboratories Computing Science Technical Report No. 97,
provides additional insights into the device and font description
file formats and device-independent output format.
groff(1), subsection “Utilities”, lists programs available for
describing fonts in a variety of formats such that groff output
drivers can use them.
troff(1) documents the default device and font description file
search path.
groff_out(5), addftinfo(1)
COLOPHON
This page is part of the groff (GNU troff) project. Information
about the project can be found at
⟨http://www.gnu.org/software/groff/⟩. If you have a bug report
for this manual page, see ⟨http://www.gnu.org/software/groff/⟩.
This page was obtained from the project's upstream Git repository
⟨https://git.savannah.gnu.org/git/groff.git⟩ on 2024-06-14. (At
that time, the date of the most recent commit that was found in
the repository was 2024-06-10.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org