sudoreplay(8) — Linux manual page
SUDOREPLAY(8) System Manager's Manual SUDOREPLAY(8)
NAME
sudoreplay — replay sudo session logs
SYNOPSIS
sudoreplay [-FhnRS] [-d dir] [-f filter] [-m num] [-s num]
ID[@offset]
sudoreplay [-h] [-d dir] -l [search expression]
DESCRIPTION
sudoreplay plays back or lists the output logs created by sudo.
When replaying, sudoreplay can play the session back in real-
time, or the playback speed may be adjusted (faster or slower)
based on the command line options.
The ID should either be a six character sequence of digits and
upper case letters, e.g., “0100A5” or a path name. The ID may
include an optional @offset suffix which may be used to start
replaying at a specific time offset. The @offset is specified as
a number in seconds since the start of the session with an
optional decimal fraction.
Path names may be relative to the I/O log directory
/var/log/sudo-io (unless overridden by the -d option) or fully
qualified, beginning with a ‘/’ character. When a command is run
via sudo with log_output enabled in the sudoers file, a “TSID=ID”
string is logged via syslog(3) or to the sudo log file. The ID
may also be determined using sudoreplay's list mode.
In list mode, sudoreplay can be used to find the ID of a session
based on a number of criteria such as the user, tty, or command
run.
In replay mode, if the standard input and output are connected to
a terminal and the -n option is not specified, sudoreplay will
operate interactively. In interactive mode, sudoreplay will
attempt to adjust the terminal size to match that of the session
and write directly to the terminal (not all terminals support
this). Additionally, it will poll the keyboard and act on the
following keys:
‘\n’ or ‘\r’ Skip to the next replay event; useful for long
pauses.
‘ ’ (space) Pause output; press any key to resume.
‘<’ Reduce the playback speed by one half.
‘>’ Double the playback speed.
The session can be interrupted via control-C. When the session
has finished, the terminal is restored to its original size if it
was changed during playback.
The options are as follows:
-d dir, --directory=dir
Store session logs in dir instead of the default,
/var/log/sudo-io.
-f filter, --filter=filter
Select which I/O type(s) to display. By default,
sudoreplay will display the command's standard output,
standard error, and tty output. The filter argument is a
comma-separated list, consisting of one or more of
following: stdin, stdout, stderr, ttyin, and ttyout.
-F, --follow
Enable “follow mode”. When replaying a session,
sudoreplay will ignore end-of-file and keep replaying
until the log is complete. This can be used to replay a
session that is still in progress, similar to “tail -f”.
An I/O log file is considered to be complete when the
write bits have been cleared on the session's timing
file. Versions of sudo prior to 1.9.1 do not clear the
write bits upon completion.
-h, --help
Display a short help message to the standard output and
exit.
-l, --list [search expression]
Enable “list mode”. In this mode, sudoreplay will list
available sessions in a format similar to the sudo log
file format, sorted by file name (or sequence number).
Any control characters present in the log data are
formatted in octal with a leading ‘#’ character. For
example, a horizontal tab is displayed as ‘#011’ and an
embedded carriage return is displayed as ‘#015’. Space
characters in the command name and arguments are also
formatted in octal.
If a search expression is specified, it will be used to
restrict the IDs that are displayed. An expression is
composed of the following predicates:
command pattern
Evaluates to true if the command run matches the
POSIX extended regular expression pattern.
cwd directory
Evaluates to true if the command was run with the
specified current working directory.
fromdate date
Evaluates to true if the command was run on or
after date. See “Date and time format” for a
description of supported date and time formats.
group runas_group
Evaluates to true if the command was run with the
specified runas_group. Unless a runas_group was
explicitly specified when sudo was run this field
will be empty in the log.
host hostname
Evaluates to true if the command was run on the
specified hostname.
runas runas_user
Evaluates to true if the command was run as the
specified runas_user. By default, sudo runs
commands as the root user.
todate date
Evaluates to true if the command was run on or
prior to date. See “Date and time format” for a
description of supported date and time formats.
tty tty name
Evaluates to true if the command was run on the
specified terminal device. The tty name should
be specified without the /dev/ prefix, e.g.,
tty01 instead of /dev/tty01.
user user name
Evaluates to true if the ID matches a command run
by user name.
Predicates may be abbreviated to the shortest unique
string.
Predicates may be combined using and, or, and ! operators
as well as ‘(’ and ‘)’ grouping (parentheses must
generally be escaped from the shell). The and operator
is optional, adjacent predicates have an implied and
unless separated by an or.
-m, --max-wait max_wait
Specify an upper bound on how long to wait between key
presses or output data. By default, sudoreplay will
accurately reproduce the delays between key presses or
program output. However, this can be tedious when the
session includes long pauses. When the -m option is
specified, sudoreplay will limit these pauses to at most
max_wait seconds. The value may be specified as a
floating point number, e.g., 2.5. A max_wait of zero or
less will eliminate the pauses entirely.
-n, --non-interactive
Do not prompt for user input or attempt to re-size the
terminal. The session is written to the standard output,
not directly to the user's terminal.
-R, --no-resize
Do not attempt to re-size the terminal to match the
terminal size of the session.
-S, --suspend-wait
Wait while the command was suspended. By default,
sudoreplay will ignore the time interval between when the
command was suspended and when it was resumed. If the -S
option is specified, sudoreplay will wait instead.
-s, --speed speed_factor
This option causes sudoreplay to adjust the number of
seconds it will wait between key presses or program
output. This can be used to slow down or speed up the
display. For example, a speed_factor of 2 would make the
output twice as fast whereas a speed_factor of .5 would
make the output twice as slow.
-V, --version
Print the sudoreplay versions version number and exit.
Date and time format
The time and date may be specified multiple ways, common formats
include:
HH:MM:SS am MM/DD/CCYY timezone
24 hour time may be used in place of am/pm.
HH:MM:SS am Month, Day Year timezone
24 hour time may be used in place of am/pm, and month and
day names may be abbreviated. Month and day of the week
names must be specified in English.
CCYY-MM-DD HH:MM:SS
ISO time format
DD Month CCYY HH:MM:SS
The month name may be abbreviated.
Either time or date may be omitted, the am/pm and timezone are
optional. If no date is specified, the current day is assumed;
if no time is specified, the first second of the specified date
is used. The less significant parts of both time and date may
also be omitted, in which case zero is assumed.
The following are all valid time and date specifications:
now The current time and date.
tomorrow
Exactly one day from now.
yesterday
24 hours ago.
2 hours ago
2 hours ago.
next Friday
The first second of the Friday in the next (upcoming)
week. Not to be confused with “this Friday” which would
match the Friday of the current week.
last week
The current time but 7 days ago. This is equivalent to
“a week ago”.
a fortnight ago
The current time but 14 days ago.
10:01 am 9/17/2009
10:01 am, September 17, 2009.
10:01 am
10:01 am on the current day.
10 10:00 am on the current day.
9/17/2009
00:00 am, September 17, 2009.
10:01 am Sep 17, 2009
10:01 am, September 17, 2009.
Relative time specifications do not always work as expected. For
example, the “next” qualifier is intended to be used in
conjunction with a day such as “next Monday”. When used with
units of weeks, months, years, etc the result will be one more
than expected. For example, “next week” will result in a time
exactly two weeks from now, which is probably not what was
intended. This will be addressed in a future version of
sudoreplay.
Debugging sudoreplay
sudoreplay versions 1.8.4 and higher support a flexible debugging
framework that is configured via Debug lines in the sudo.conf(5)
file.
For more information on configuring sudo.conf(5), refer to its
manual.
FILES
/etc/sudo.conf Debugging framework configuration
/var/log/sudo-io The default I/O log directory.
/var/log/sudo-io/00/00/01/log
Example session log info.
/var/log/sudo-io/00/00/01/log.json
Example session log info (JSON format).
/var/log/sudo-io/00/00/01/stdin
Example session standard input log.
/var/log/sudo-io/00/00/01/stdout
Example session standard output log.
/var/log/sudo-io/00/00/01/stderr
Example session standard error log.
/var/log/sudo-io/00/00/01/ttyin
Example session tty input file.
/var/log/sudo-io/00/00/01/ttyout
Example session tty output file.
/var/log/sudo-io/00/00/01/timing
Example session timing file.
The stdin, stdout and stderr files will be empty unless sudo was
used as part of a pipeline for a particular command.
EXAMPLES
List sessions run by user millert:
# sudoreplay -l user millert
List sessions run by user bob with a command containing the
string vi:
# sudoreplay -l user bob command vi
List sessions run by user jeff that match a regular expression:
# sudoreplay -l user jeff command '/bin/[a-z]*sh'
List sessions run by jeff or bob on the console:
# sudoreplay -l ( user jeff or user bob ) tty console
SEE ALSO
script(1), sudo.conf(5), sudo(8)
AUTHORS
Many people have worked on sudo over the years; this version
consists of code written primarily by:
Todd C. Miller
See the CONTRIBUTORS.md file in the sudo distribution
(https://www.sudo.ws/about/contributors/) for an exhaustive list
of people who have contributed to sudo.
BUGS
If you believe you have found a bug in sudoreplay, you can either
file a bug report in the sudo bug database,
https://bugzilla.sudo.ws/, or open an issue at
https://github.com/sudo-project/sudo/issues. If you would prefer
to use email, messages may be sent to the sudo-workers mailing
list, https://www.sudo.ws/mailman/listinfo/sudo-workers (public)
or <sudo@sudo.ws> (private).
Please not report security vulnerabilities through public GitHub
issues, Bugzilla or mailing lists. Instead, report them via
email to <Todd.Miller@sudo.ws>. You may encrypt your message
with PGP if you would like, using the key found at
https://www.sudo.ws/dist/PGPKEYS.
SUPPORT
Limited free support is available via the sudo-users mailing
list, see https://www.sudo.ws/mailman/listinfo/sudo-users to
subscribe or search the archives.
DISCLAIMER
sudoreplay is provided “AS IS” and any express or implied
warranties, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose are
disclaimed. See the LICENSE.md file distributed with sudo or
https://www.sudo.ws/about/license/ for complete details.
COLOPHON
This page is part of the sudo (execute a command as another user)
project. Information about the project can be found at
https://www.sudo.ws/. If you have a bug report for this manual
page, see ⟨https://bugzilla.sudo.ws/⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/sudo-project/sudo⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-08.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org